Tianjin Tian Hu Battery Co -- Product parameter
Float charge:
  Float charge:
      Float voltage of FM and GM model is 2.40V/cell and 2.35V/cell respectively.
      F10 Charge with 0.1C20 to 2.3V then with constant woltage at 50% C20 DOD and 100% C20 DOD.
      F11 Charge with 0.1C20 to 2.3V then with constant woltage at 50% C20 DOD and 100% C20 DOD.
      Float voltage of FM and GM model is 2.40V/cell and 2.23V/cell respectively at 25℃ The float voltage should be corrected with –3mV/℃/cell coefficient when the temperature is not equal to 25℃.
      F12 Relationship between float woltage and temperature of GM model battery.
  Charge voltage during cycle use:
      The battery should charge with constant voltage and limited current range of 0.1-0.2CA (C:FM model C20 , GM model C10)during cycle use .The charge voltage of FM and GM model is 2.4V/cell and 2.35V/cell respectively at 25℃ . The charge voltage should be corrected with –4m V/cell coefficient when the temperature is not equal to 25℃ .Timing/automatic limited current charge equipment could be used to prevent overcharge.
  Equalizing eharge:
      This method could charge with constant current ,then 2.40V/cell FM model ,2.35V/cell GM model,Charge time is dependent on DOD .see the following table:

ADD:Warm Family House of TianJin BeiChen  |  TEL:022-84813581  |  CONTACT:Mr. OuYang
E-MAIL:xl@th-upsbattery.com  tjtianhu@163.com    Support:Www.Tjee.Com

 Discharge characteristic
 Service Lifetime
 Resistance&Self-discharge performance
 Charge characteristie
 Float charge
 Supplementary charge
 Usage and precautions
 Installation notices
 Operation requirements