Tianjin Tian Hu Battery Co -- Product parameter

Operation requirements:

 FM and GM mode battery could suit for continuous float charge working conditions and cycle charge/discharge.

 The float voltage of GM and FM model battery is 2.35 V/cell and 2.4V/cell respectively at 25℃ .It will reduce the capacity and lifetime when the temperature is too high or too low.

 Supplementary or equalizing charge in the following case.
     Recharge in a shot time when emergency occurred.
     Equalizing charge needed when float voltage of some cells less than 2.2V/cell .

  Supplementary or equalizing charge methods as follows charge for 10h with 2.4V/cell at 21-32℃ ; charge for 20h at 10-20℃.

 Recharge with limited current constant voltage , first charge with 0.1C10A or 0.125 C10A,then charge with constant voltage when rech to 2.4V/cell.

 Methods of learning supplementary or equalizing charge degree;
     For constant load ,if the current reduced quickly and go to stable state and remained for 3h ,it represented 90-98% charge of state .
     For variable load , if the indicated cell voltage remained stable for 6h it represented 100% charge of state.

 Record operation data,time weekly, including cell voltage terminal voltage, ambient temperature.
     Check out terminal solid or not , make loose connections tight , Don’t take apart or reassemble battery system individually.

 Find out reasons for the following troubles and replace broken-down battery in time:
    Voltage abnormity
    Physical breakage(case,cover crack or distortion)
    Electrolyte leak
    Temperature abnormity

ADD:Warm Family House of TianJin BeiChen  |  TEL:022-84813581  |  CONTACT:Mr. OuYang
E-MAIL:xl@th-upsbattery.com  tjtianhu@163.com    Support:Www.Tjee.Com

 Discharge characteristic
 Service Lifetime
 Resistance&Self-discharge performance
 Charge characteristie
 Float charge
 Supplementary charge
 Usage and precautions
 Installation notices
 Operation requirements